Foam Roofing in Arizona


No matter what kind of roofing material was used when your house was first built, it will eventually wear out. Knowing the options that are available to replace it with, helps make more informed decisions for budget, longevity, and performance. Foam roofing in Arizona can be an excellent option for homeowners. It has specific benefits for the heat we experience. We have expanded the information to help you consider it as one of your choices when picking a new roofing system.

What Roofs Is It Good For?

Flat roofs are typically where foam roofing has been found but it can be applied to virtually any type of roof. Roofs that have unusual architecture can be difficult to custom fit with traditional roofing materials. Foam roofing can be sprayed on and this helps the roofing compound get into tighter, harder to reach spots.

Foam roofing does more than keep out the water from rain storms, it helps keep the heat out. With an average of 300 days of sunlight per year keeping our homes comfortable from the heat of summer is one of our biggest priorities in Arizona. With that in mind we choose great insulation for our attics and the walls of our homes. Foam roofing can help add increased thermal protection from the heat. This means even lower electricity bills from running air conditioners.

While the cost of installing a foam roof does run a little higher than shingle roofing, the savings pay the difference quickly. Paying to install the roofing happens only once every 20 or so years; having energy savings every single year pays the difference for the foam roofing, and much more.

What Exactly Is Foam Roofing?

For better than 45 years polyurethane foam has been used as an insulator.  A combination of polyol and isocyanat is combined through a sprayer at the time of application. The compound is applied as a liquid and shortly after application it begins to bubble up and expand. This process helps force the material into crevices and cracks in the roof and seals them up. This property makes foam roofing extremely dynamic and a great option for virtually any type of roof.

One of the major advantages to being a sprayed on roofing system is that there are no seams. Seams in other roofing systems can be the Achilles heel in keeping water from leaking into the house. Because foam roofing is applied as a liquid it bonds to itself without seams and creates a water, and air tight seal. This helps the thermal performance of the roofing system and helps save even more energy.

The final step after the spray foam is laid down is adding an outer layer. This outer layer’s job is to protect the foam from the elements.  The outer layer helps protect the roof from damage from branches or limbs falling on your roof if you have a tree near the house, or if you have workers up on your roof. Even if the outer layer is damaged the seal from your foam roof will remain intact.

Foam Roofing Installation & Repair

If you have a home in the Phoenix valley Right Way Roofing can help you install, maintain, and repair foam roofing or any other type of roofing you might have. If you need some help deciding which type of roofing is best for your home, your location, and your budget we will help you make the most cost effective decisions for your Arizona home.


Solar and Roofing Incentives


Since the beginning of 2006, the “Solar ITC” or Investment Tax Credit has helped yearly residential and commercial solar installation increase by 1600%. In 2015, showed the largest increase for installed solar, and within the next year it is expected to double.

Solar ITC Extension

Just this last year, the solar ITC gave a multiyear extension, which provides a business certainty to project investors and developers. Right now, the ITC has a 30% reduction for income taxes based on the solar investment. This extension provides a tax credit based on the invested eligible property through the projects that have started constructions before 2019. This is when the ITC will drop to 26% for 2020 and then 22% in 2021. Once 2023 hits, the residential credit will then drop to zero while the utility and commercial credit will drop to 10%.

Because of this extension, the solar prices are expected to keep falling. Solar power happens to be one of the most versatile forms of electricity and can be used anywhere. It has a lot of potential for fighting climate change as well removing poverty through rural electrification. Additionally, while the solar prices fall, the installation and technical efficiency will climb as the ITC causes job creation and growth within the US.

“Residential solar systems are available in different sizes, ranging anywhere from ‘size 3’ to ‘size 8kW’, and they are going to cost you between $15,000 and $40,000 dollars.” Power Solar Phoenix

Although this extension is a great place to start, the question is if the government should continue to expand and extend the solar incentives to try to attract more commercial customers?

The answer is a big “YES”. There are more and more businesses that want to have a competitive advantage over global counterparts, and the solar ITC helps to give installation savings with a tax credit but also energy savings..

Roofing & Solar System Installation

Generally solar systems are installed on the roof tops of homes and businesses. Clearly the first step to prepping a roof for solar power is to make sure that it is structurally sound and all of the roofing material is in good condition. Roofing systems that are highly reflective may be added as part of your solar ITC, but only in the case that the highly reflective roofing is more costly that a conventional roofing system. Although, when it comes to the roofing industry, the solar ITC will need to establish parameters that are for roofing installation on what type of roof would be needed for solar installation in order to get that particular incentive.

The roof will need to be in good condition to start with before the installation. It needs to have the right insulation and membrane thickness to support installation. If the roof doesn’t meet these types of conditions, then the roof will need to be replaced with a system to support it. You won’t be able to use a cheap roof or just not replace the roof and install a solar system with the mindset of getting full benefits. You will eventually run into issues with leaks, but it will cause you to reinstall the whole solar system once you replace the roof.

The solar ITC is a great way to create jobs and move towards having clean energy, but as the solar energy industry increases, so do the stipulations for having continued success.

Roofing Installation & Repair in the Phoenix Valley

Right Way Roofing has the right tools, knowledge, and understanding of all things roofing. If you have a solar system or are thinking about getting one installed Right Way can help you make sure that the roofing is right before and after the solar system is installed to avoid leaks. Use our contact form or give us a call today.


Mesa Slate Roofs

Mesa Slate Roofs

Welcome To – We are a slate roof installation company in Mesa, AZ providing Mesa slate roof repair, slate roof installation, and slate roof maintenance.

Slate Rock Used To Make Slate Roof SystemsWhat is a slate roof – A slate roof is a type of roofing system created with foliated, fine-grained, homogeneous metaphoric rock. Metaphoric rock is mined from quarries in large blocks that get cut down into individual shingles. These aren’t the flexible type of rubberized shingles you are used to seeing, these “shingles” are made from pure hard rock. Thus being said, each shingle is unique in appearance.

Slate Roof Installation

Slate Roof Installation Mesa

Slate roofing installers know that slate is one of the most durable types of roofing systems available in the industry. Installing a slate roof ensures that your roof with last for a century or longer.

However, not every slate roof installation company knows how to install a slate roof properly. Slate is a specialized roofing system that requires a complicated installation. Don’t fall for roofers who do not have experience in installing slate.

Besides installing the slate itself, one of the most important parts of any roofing system is the flashings and underlayment. These two parts of the installation also affect the longevity of your roofing system. Right Way Roofing Inc uses the most durable underlayment system in the roofing industry.

Slate Installation Style Options

  • Standard Slate Roof Installation
  • Graduated Slate Roofs Installation
  • Textural Slate Roofs Installation

Slate Roofing Colors Options 

  • Gray
  • Black
  • Green
  • Red
  • Purple

Slate Roofing Is Durable & Requires Low Maintenance

Slate is a natural stone than is more durable than any man made roofing systems. Its high-density make your roof waterproof and will even provides protection in case of a fire. Slate is also mold and fungus resistant. Slate roofing is maintenance free and doesn’t need to be repair often.

Slate Roofing Increases Your Home’s Value

Slate roof installation for your home increases your homes resale value. Also, slate roofing attractiveness might just help you home sell quicker.

Slate Roofing System Estimate

To get an estimate on slate roofing installation in Mesa Arizona call us today at 480-232-5458 or 602-299-8851.

Read Our 5 Star Slate Roofing Reviews in Mesa

Read our 5 star slate roofing reviews from satisfied clients.

“Owned by 3rd generation roofers, employing hand-picked and personally trained people, doing quality installations at competitive prices. I would not have my roofing work done by anyone else, and have not since I was introduced to the Right Way over 13 years ago. 3 houses, 5 different projects – they are simply THE BEST!” ~Ron

5 Star Slate Roofing Reviews On Google
5 Star Slate Roofing Reviews On Yelp
5 Star Slate Roofing Reviews On Angies List
5 Star Slate Roofing Reviews On BBB

Flat Roof Installation Cost

flat roof installation costs

How much does flat roof installation cost?

Flat roofs are easier to repair than roofs with a slope. Flat roof installation costs averages $4,000-$5,000.

Flat roof installation & replacement costs average between $250-$350 per sq ft. and come with warranties ranging between 10 and 20 years, but the flatroofing can last up to 25 years with proper care.


Flat Roof Repair Costs

Flat Roof Repair Costs

How much does flat roof repair cost?

Standard costs for flat roof repair, flat roofing materials, and labor costs.

  • Four sheet of plywood = $80
  • Square of shingles = $100
  • Roll of Galvanized Nails = $65
  • Roof Cement = $22 per gallon
  • Roofing Labor Costs = $50 – $75 per hour
  • Shingle Installation = $1.25 – $2 per square ft
  • Repair Roofing Around Skylight = $450
  • Roof Sealant Application = $850-$1,000
  • Waterproofing Membrane = $61 per square of roof underlayment

What does flat roof repair include?

  • Repairing/Replacing Roofing Shingles
  • Repairing /Replacing Plywood
  • Resealing Seams
  • Replace/Repair Metal Flashing
  • Leak Repair
  • Skylight Repair
  • Reapplication Of Roof Sealant
  • Underlayment Repair

Which Type Of Residential Roofing Do I Have?

Which Type Of Residential Roofing I Have

Right Way Roofing in Mesa knows that our job isn’t just to repair residential roofing.  We want you to be able to understand what type of residential roof you have.  This will help you understand how to maintain it and make it last longer. It will also help you know when it’s time to call in some back up and hire a professional.

Depending on the budget and era one of many different types of roofing were used to build your roof.  There are 7 different types of roofing systems.  We’ll take a look at each of them here.

Types Of Residential Roofing Systems

The key to any residential roof lasting as long as possible in Mesa, is keeping your eyes to the sky.  Be aware of its condition and notice when there are shingles missing or damaged spots.  This will save you roofing repairs and help prevent damage to the internal structure of your home.  Simply keeping debris like leaves and branches off your roof will make all of the roofing systems last longer in Mesa, AZ.

  • Slate Roofing – Being a natural stone roofing option slate has a beautiful appearance.  It is also one of the longest lasting roofing materials on the market.  There are two types of slate roofing, hard and soft.  The hard variety of slate roofing is said to last around 75 – 200 years.  The soft slate residential roofing lasts about 50 – 125 years.  Telling the difference can be a bit tricky.  Generally black slate is the soft type of slate roofing.  Colored slate is usually your harder, longer lasting variety.  The best roofers will be able to tell the difference for you simply by tapping on one of the slate tiles.  If your roof is made of this type of material it does require a little maintenance. Read more about Mesa Slate Roofs here.
  • Slate Maintenance – Despite residential slate roofs reputation of lasting for hundreds of years they do break down. If you have noticed any leaks you’re going to have a decision ahead of you.  If you happen to have the hard variety it may be well worth the investment to restore the roof.  This might mean an additional 100 years of use.  However if you have a soft slate roof it might be better to just replace it.
  • Shingle RoofingShingle roofs were one of the most common and widely used residential roofing materials used nationwide.  It’s easy for a home owner to tell if this is the type of roofing they have in Mesa.  They are pretty simply made which made them inexpensive to install.  They were made with a base of wood fiber, paper or cellulose and then coated with asphalt.  The asphalt made them waterproof.  A top coating of ceramic granules are embedded within an additional layer of asphalt to help with durability and provide grip for walking on your roof. More about shingle roofing systems.
  • Shingle Maintenance – Being one of the least costly residential roofing options in Mesa repair is also cheap and easy. Hiring a professional roofing company will ensure that the repairs are done right the first time.  It will also keep you out of the sun and safely on the ground.  Things you can do for yourself are pretty easy.  Keep debris off your roof, use a hose to get leaves and small sticks off your roof.  If you see shingles are missing call your Mesa roofing company or run down to the hardware store and get them replaced.  Prompt action with missing shingles will save you costly repairs later.
  • Metal Roofing – As much as metal roofing is considered one of the longest lasting most durable materials, it still needs to be monitored and cared for.  It’s easy to tell if this is the roofing type you have.
  • Metal Maintenance – Keeping debris off all of roofing systems is paramount to preventing backup, and leaks. Metal roofing requires a few other considerations. Be aware of anywhere in your roof where you have heat vents, chimneys, or oil condensers.  These items can exhaust chemicals that can corrode the metal and destroy paint.  Either call for a free roofing inspection, or get a ladder and look for loose roof sheets, fasteners, flashings or even punctures from objects that might have fallen on your roof.
  • EPDM Roofing – EPDM is an incredibly durable rubber roofing membrane.  EPDM stands for ethylene propylene diene terpolymer. It’s very common with low slope roof systems in Mesa.  You’ll know if this is your roof type because of its rubber feel.  It is also generally white in color.
  • EPDM Maintenance – Periodic examination of the coating will help prevent unnoticed areas to get worse. As with most roofs keeping the debris off the roof is critical in keeping it in good condition.  If you notice damage it is critical to use the right materials to repair it.  Your local Mesa roofing company can help you get this done.  If you venture to do this yourself make sure not to use anything that is normally used for asphalt roofs.  It will destroy your EPDM membrane and lead to additional repairs.

Free Residential Roof Inspection and Professional Residential Roof Repair In Mesa, AZ

Some residential roofs in Mesa are easy to identify.  Some of the synthetic polymer roofs need an expert to determine which system was used.   A free roof inspection will do a few things.  Firstly you’ll know for sure which type of residential roof you have.  Secondly you will know if there is any damage.  Lastly you will understand if there are any repairs and what it will take to get your roof back to 100%.

Give Right Way Roofing in Mesa a call today and put your worries about your roof to rest.

480-232-5458 or 602-299-8851



Types of Roofs in Phoenix AZ

Types of Roofs For Phoenix AZ

There are generally two different classes of roofing options, one for the low sloping flat roof, and another for the steep sloping pitched roofs.  The type of roof system you choose will depend on the pitch of your roof.  A roof with a slope greater than 3:12 or 14 degrees is considered a steep sloped roof.  A low pitched roof is one equal to or lower than the 3:12 ratio.  Listed below are the types of roofing options and roofing systems.

Steep Roofs – 5 Types of Roofs

Concrete tile and Clay tile – Concrete tiles are created by mixing sand, water, and cement in different proportions.  These tiles are extruded in molds under high pressure to increase strength.  Clay tile roofs are very durable and last for many years.  Some homeowners even get as much as 50 years or more from clay and concrete tile roofing systems.

Asphalt Shingles – Created from a base material they are comprised from either glass-fiber or organic mat.  This gives asphalt shingles their strength and water-resistant attributes.

Metal Roofing – Having three main categories of metal roofing which are, metal shingles/panels, structural metal panels, and architectural metal panels, architectural metal panels are usually the preferred option in steep sloped roofs.  Given that the architectural metal panels aren’t generally made to have water tight seals, they are only recommended for these steep slope applications where the water will shed quickly.

Wood Shake Roofs – These shingles and shakes are manufactured from pine, cypress, redwood, cedar and redwood trees.  Wood shake roofs are shaped so that the butt is thicker than the tip of each the tiles to encourage quicker water drainage.   A split and resawn shake is first split from the log and then sawn on the back.  There are also taper sawn shakes which are sawn on both sides.  Wood shingles are also sawn on both sides and have a natural taper to them so they are uniform.

Slate Roofing – Being a naturally occurring material it’s naturally nonabsorbent, dense, and durable.  This type of material has two properties, fracture and cleave.  It’s the cleave property that allows manufacturers to split it in one direction and create uniform tiles to use as a roofing system.  Also being a naturally occurring material you will find that the characteristics of this material can vary depending on which quarry they are taken from.  Some will have a smooth or rough surface naturally.

Low and Flat Roofs – Types of Roofs

BUR or Built-up roof membranes – This type of roof has been used for better than 100 years and is commonly referred to as your “tar and gravel” roofing system.  These are usually constructed by using alternating layers of reinforcing fabrics and bitumen that cure to create a finished membrane.   You might hear people talk about the amount of piles their roof has, or a roofing contractor saying it.  A 4 pile roof means that it’s a four ply layer of this type of roofing system.

Metal Panel for Low Slope Roofs – The only option in this category is the structural metal panel.  This is due to the fact that metal panel roofs made for low slope applications have a seam system that helps keep water out.  These must be used in low slope applications, but can also be used for steep sloped roofs.   They have excellent hydrostatic properties that create a water barrier.

Polymer-modified sheets – This is a material much like your BUR roofing systems with the addition of a polymer modified membrane.  These are made of reinforcing fabrics and set into rolls so they can be transported to the job site.  They can either be applied with a hot mopping of asphalt, a cold adhesive, or even some varieties are applied with a heat-weld and torch.

Single-Ply Membranes – Having two main types, Thermoplastic and Thermoset variants, they are factory manufactured sheet membranes.  The Thermoplastic type can be adjusted and changed with the application of heat, while the Thermoset sets permanently after the application of heat.

Polyurethane Foam (SPF) Roofing – This type of roofing is made by mixing and spraying a binary liquid that forms the base of this adherent roofing solution.  Having the flexibility of being a sprayed and layers system it can be applied in a varied thickness to provide a natural slope to your roof and improve drainage.

If you’re not sure they pitch or slope of your roof, need a new roofing system for a new built house, or you need repair on an existing roof get in touch with the experts who to right the right way, Right Way Roofing Inc.  You can reach them at either 480-232-5458 or 602-299-8851.

Roof Inspection Before You Need Roof Repair

Roof Inspection Mesa Arizona
Manage your roof before it manages to cost you big money

If you’ve ever bought or sold a house you are more than familiar with the need for having a roofing inspector.  If you haven’t, they are a professional who comes out and takes a look at the roof to assess the overall health of the roof during the selling or buying of a home and also after severe storms to check for damage.  They can also provide an invaluable service outside of those other roles.  They can come and do an inspection and find simple, inexpensive fixes that will prevent much more costly repairs later.

The majority of roofing experts agree that homeowners should have these professional inspections done annually or at least every two years.  Having a professional come and inspect your roof with help spot potential problems while they are small and easy, and inexpensive to fix.  Like all professionals, their expertise comes with a price.  But when compared with the high cost of full roof replacement, it’s well worth the money.

Inspectors are thoroughly trained to notice things that most of us would just ignore.  Small signs that can help prevent the big repairs.  Some of the things they’ll be able to tell you from looking at the roof will be its age, how long it will last, poor or unacceptable installation and even if there have been changes to the roof.

When considering the condition of your roof it’s not just about how it’s doing and if it needs to be replaced.  It’s also about all the things that you own and love that reside under that roof depending on it to protect them from the rain, the shine, and the everything else.

Some warning signs that you should get your roof checked out by a roof inspection professional are things like a roof over 15 years old, torn flashings, blistered or stained ceilings or walls, water stained brick or paint peeling from where the wall meets the roof, and even sagging eave troughs.

Leaking Roofs, the Hidden Menace

If your roof is leaking it can easily go unseen with our busy lives.  If it isn’t caught it can raise your energy bills, and lower your property value too.  Also if water sits it can cause mold in your walls and roof.  Everyone is affected by mold spores and certain molds can lead to serious respiratory complications.  So you can see that it’s not just the health of your house, but the health of you and your family that is on the line.  One of the best investments a homeowner can make is to make sure that their roof is up to code, energy-efficient and secure.

Easy ways to tell if you might have a leak in your roof:

Broken Roof Shingles – If you can see that some of your shingles have got broken by wind or impact it’s a sign that water might have a way in.

Shingle Bare Spots – Over time the surface of your shingles can actually wear away.  All the sun, wind, heat, rain and other elements that wear away at them can make spots where it’s not longer effective at guiding water away and off your roof.

Curling Roof Shingles – If the edges are starting to come up they are leaving your roof exposed to the elements and water will find a way in.

FREE roof inspections from Right Way Roofing
If you’re not sure, and don’t want to climb up on your roof, or up in your attic CALL the experts at Right Way Roofing for a FREE Roof inspection.   Prevent minor issues from becoming MAJOR roof repairs by having them come and check for the signs of damage and weakness today.

The Average Cost to Replace a Roof in Arizona

The Average Cost to Replace a Roof in Arizona

One of the most costly upgrades a homeowner can experience is replacing their roof.  Due to variables based on the original construction of your home the average cost to replace a roof will have to be evaluated in person.  Roofing contractors have to evaluate the pitch, size, cost of materials and accessibility to give you an accurate quote.  With that in mind it’s not a surprise that the cost to replace a roof is subjective on which roof is being replaced.

Ballpark figures though can range from as low as $5,000 for a shingle roof, which is the most common type of roofing system in America, to the top shelf materials and design systems which can go for $25,000 and up.

Removing the Old Roof

Depending on the size and accessibility of the house the cost of removing your old roof will take more or less man hours, and that affects the price.  Along with that heavier materials are harder and take longer to remove.  Keeping this step in mind will help get an accurate quote.

The Pitch Affects the Price

One of the variables that will affect the cost of replacing your roof is the pitch, or the slope.  It’s really just a matter of how steep the roof is and how hard it will be to physically be on your roof security your new roofing system.  If it’s over a 7:12 ratio it’s considered un-walkable and would possibly require special safety precautions.  That ratio might sound confusing but the 7 is the vertical and the 12 is the horizontal, together they constitute the slope.  So for every foot your roof runs sideways it drops 7 inches.

With a roof steeper than a 7:12 you also can’t stack the materials on the roof for quick installation, they must be brought up by hand for each section, this requires extra time and safety harnesses must be worn.

Type of Roofing System

You’ve got options to fit your style, needs and geographic areas.  The types are pretty simple and all have their own unique benefits.  The most affordable option is asphalt.  This is followed by wood, tile, metal, and slate.  A shingle roof can be between about $5-7 per square foot.  That means that per everyone 200 square feet of roof you’ll be looking to spend about a thousand to fourteen hundred dollars.

That means that for a 1,200 square foot house you’re looking at 4,000 to 6,000 depending on where you are and what you need.

The most affordable roofing system, according to highly rated roofing contractors is asphalt.  Metal roofs are about twice as expensive as your asphalt options.  Slate by comparison is about 5 times the price, but also lasts a lot longer.

Knowing that asphalt is the most affordable option it should be kept in mind that it isn’t the most durable option either.  Asphalt shingles are said to have about a 20 year lifespan, in contrast a professionally installed tile, metal, or slate option can last 50 years or more!  This can play a roll in considering which option is best for you and your house.

A Path to the Project

If we are able to just back a truck right up to the house it will make the unloading of materials much quicker and simpler.  Should it not be possible to get that close to the house, it will require hand unloading which also means more man hours.

Free Roofing Estimates

The pros at Right Way Roofing have been a family owned and operated business since 1963.  We know roofs and we know how to get you back under a safe and weather tight roof in a hurry.  If it’s time to update your home or you have some leaks and/or damage give us a call at either 480-232-5458 or 602-299-8851.  If it’s after hours go ahead and shoot us a message via our contact form.

As our founder Earl Clark said, “There’s only one way, the right way!”

What Makes Tile Roofing Better for Mesa?

what makes tiles roofing better for mesa

What makes tile the most popular choice for roofing in the world?  It has benefits that overshadow it’s alternatives in energy savings and protection.  Below you’ll find out why so many homeowners choose tile roofing.

Long-Term Performance

Throughout the world for over 100 years tile roofing has held the track record for performance when compared to it’s alternatives.  With the latest advancements in materials tile roofing has a natural ability to shed water and with it’s shape it allows ventilation.  This flexibility allows tile roofing to be the go to choice for both the warmer and cooler climates.   With tile’s higher strength and weight it’s able to meet the demands from today’s design requirements.

Colors and Styles to match everyone’s preferences

With many shapes, colors and sizes, Rightway Roofing can help you achieve the architectural style that you’re looking for, whether its New England Colonial, contemporary, historically accurate or even Mediterranean and authentic Spanish styles.  In addition tile can be round or flat, have wood grain, or attempt to match original roofing materials.  With so many options, the sky’s  the limit!

Color fast benefits

While sourcing the clay from natural deposits that have varied colors or concrete files with different amounts of iron oxide pigments the color of your tile will stay true for many years.  This durability can serve you for up to 50 years, or more!

Protection that lasts

Unlike other roofing materials tile roofing is robust in it’s weight which maintains its long lasting beauty.  While most homes today are constructed stout enough to support a tile roof, there are alternatives for a lighter weight tile.  Because of this it’s quickly becoming the consumer’s choice due to it’s durability and ease of replacing individual sections more easily that shingles and other alternatives.

High Wind Protection

With Mesa’s frequent high winds tile roofing can be one of the best options for our customers.  The clay and concrete tiles are one of the few roofing choices that can withstand winds up to 150 mph!  This allows our customers to rest assured that their home rests under a secure cover.

Cost Effective

The National Association of Home Builders found that fiber cement shingles last about 25 years and asphalt composition last about 20 years. So with a lifespan of 50 to 100 years clay and concrete tiles you’ll be saving money, year after year.

Easy Maintenance

Maintaining tile roof systems require considerably less work.  Tile maintenance is restricted to gutters, venting, and protrusion flashings. Other roofing systems require painting, cleaning, coating, and/or having to seal the majority of the roof surface.

Free Tile Roofing Estimates

If you’re interested in receiving a free tile roofing estimate, contact Right Way Roofing today at 480-232-5458 or use our contact form and one of tile roofing experts will be with you shortly.