2017 Arizona Roof Repair Costs

Roof Repair Costs Arizona 2017

If you are searching for “2017 Roof Repair Costs Arizona” you have probably discovered a leak in your home, or maybe some missing shingles on your roof. Weather, time, and accidents wear down roofing materials causing leaks in homes. Ensuring that homes have a sturdy and water tight roof is one of the biggest priorities of home maintenance. Visible signs of leaks or damaged areas on the roof should be addressed immediately. Left to fester, water seeps in and can rot the decking material, damage insulation layers, and end up forcing homeowners to completely replace their roof. Not every type of damage is the same, and the repair approaches vary. It is very important for Arizona home owners to keep their eye out for signs of damage.

On This Page:

  1. Asphalt Shingle Repair Cost
  2. Tile Roof Repair Cost
  3. Wood Shake Roof Repair Cost
  4. Flat Roof Repair Cost
  5. Metal Roof Repair Cost
  6. Slate Roof Repair Cost
  7. What Causes Roof Damage?

Common Roof Repair Costs by Material

Roofing materials vary by design, material, and style. These materials include asphalt shingles, wood shake roofs, single ply roofing, flat roofing, foam, composite roofing, and metal.

Average Asphalt Shingle Repair Cost = $250

Asphalt shingles are designed to withstand 110mph winds. With age or when shingles are not properly installed they can lift up or blow off the roof. These shingles are designed to be installed with a series of nails in a thicker section of the shingle called the nailing strip. If roofers are moving too quickly the nails are not driven properly and shingles will be more prone to blowing off or lifting.

Average Tile Roof Repair Cost = $350

As one of the most popular roofing materials in Arizona tile roofs can be compromised by shifted, sliding, cracked, or missing tiles. The design of tile roofs incorporates the underlayment in the water shedding design of the roofing system. This means old or poor quality underlayment can be a very common cause for leaking tile roofs. Lightweight felt ages and can easily cause leaks. Galvanized steel underlayment also ages over time and it is possible that corrosion will allow water to leak through holes in its material.

Average Wood Shake Roof Repair Cost = $360

Wood is a natural material and therefore is susceptible to insects and moss. If wood shake roofs are not maintained properly moss will cause the shakes to deteriorate and leave your decking exposed. This is more of a risk when the roof gets a lot of shade.

Average Single Ply, Flat, & Foam Roof Repair Cost = $400

Flat roofs are designed to be level and even to help avoid water from pooling and staying on the roof. Over time sections of the roof will start to sag causing uneven areas and water to start to pool. Improper originally installation can mean that materials were not sealed correctly or sections did not adhere securely. This can be caused by roofers that don’t take the time to clean the roof before installing roofing materials. Some roofing systems include insulation board. If there are leaks in the roofing materials, this insulation board soaks up and stores water. This can lead to the growth of mold in your roof.

Average Metal Roof Repair Cost = $300

There are a few reasons metal roofs can start to leak. Clearly when they are not installed correctly leaking metal roofs are not a surprise. Fasteners and seams are the areas that are common leak problems. These problems are either caused by the effects of time loosening the fasteners and seams, or caused by inadequate installation. Bad repairs, missing hardware, or roof modification also will lead to leaky metal roofs.

Average Slate Roof Repair Cost = $500

When slate roofs are not installed properly individual slate tiles can stick up and provide water a way into your roof. For areas that get snow in Arizona there is also a chance of ice dams causing leaks. When water cannot run off the roof or is backing up into gutters it will find somewhere to go, unfortunately this might mean right into your home.

Typical Causes For Damage

Leaky roofs are usually caused by the same set of problems and issues. Here’s a list of common roofing issues that require repair in Arizona.

Missing Shingles – While there are a bunch of different materials that shingles can be made from, when areas are missing, clearly they aren’t doing their job. Wind is usually the cause of missing shingles and leaves your roof decking exposed to the rain, sun, and more.

Damaged or Inadequate Flashing – Flashing is used where roofing materials meet edges and the pipes that poke out of your roof. When these flashings are not properly installed, or are simply corroded from age and weather exposure they can cause leaks. Corrosion can occur on both the flashing, and the pipes themselves. This leads to your roof not having that water tight seal.

Leaking Skylights – Letting a little light in is great, but when your skylight is letting some water in the fun is over. The seals on the skylight can age and the skylight window material can crack and allow water into your home. There are times where water on the skylight could simply be condensation, but having them checked out can help prevent damage.

Roof Valleys – While the entire roof gets the sun and rain the valleys of the roof end up taking the brunt of the volume. Roofs are many times designed with valleys, or interior angles that are the low areas in your roof line. When it rains gravity and your roofing materials shed water down off the roof, into valleys and then into your gutters. This makes roof valleys a critical area to watch. Improper cleaning, damaged flashing, or even the buildup of fungus can damage the valleys and lead to leaks.

Leaking Chimneys – Sealant and more flashings are used to create a water tight seal around chimneys. Over time these seals break down and flashings can be pulled away by wind. This means that rain might have a path straight into your home at the gaps in your chimney.

Arizona Roof Repair Services

If you live in the Phoenix valley and you have a damaged or leaking roof, Right Way Roofing can help. We can do the work finding the damaged area, recommend the most affordable repairs, and get the job done the Right Way. Roof repair is our business and we strive for the highest customer satisfaction by using the best materials and giving every job our full attention. Give us a call to get your roof repaired by calling 480-232-5458 (East Valley) or 602-299-8851 (West Valley).

Types Of Commercial Roofing

Types Of Commercial Roofing Mesa AZ

Commercial roofing has five basic categories including metal, single-ply, built-up, modified rubber, and spray foam. Each have their individual advantages like low cost of installation, or significantly higher durability and lifespan.

Metal Roofing

Metal roofing tends to be one of the most selected types of commercial roof materials. There are a few types of metal and styles that are used for roofing. These include aluminum, corrugated steel, aggregates of zinc, metal tiles sheets, silicon-coated steel, tin, lead, and stone-coated steel.

Extended exposure to the sun can rust many types of metal, especially steel. To help prevent rust surfacing layers are added that protect against precipitation and intense sunlight. Most of the time the metal roofing surface coatings are made from acrylic, epoxy, or ceramic.  They help extend the life of the metal roof by protecting against rust and even offer some reflective properties.

Single-ply Roofing

Single-ply roofing materials are factory made membranes that come in two basic types, thermoset and thermoplastic. These roofing types are installed in various ways that include mechanical attachment, being held down with ballast, or even being fully installed. With single-ply roofing there is not usually a surface coating included. They often do include reinforcement layers that feature fleece backing, polyester fabrics, glass fiber or felt.

Thermoset membrane is usually EPDM (ethylene propylene diene terpolymer), which is a extremely durable rubber roof membrane.  This roofing is available in either black or white and comes in different lengths and thicknesses depending on the needs of the commercial application.

Thermoplastic membranes differ by having no chemical crosslinking and can be repeatedly softened or hardened by applying heat or letting the material cool. This means that seams are made via heat welding instead of solvent welding.

Built-Up Roofing

Built-up roofing, or BUR as it is commonly referred to, are known many times as tar and gravel roofs. They are made up of layers of bitumen and reinforcing fabrics that are laid in alternating layers. These alternating layers together make up the finished roofing membrane that helps keep water out. Installation is carried out by laying the membranes out over the roof’s surface. The layers of material are many times referred to as plies. The bitumen found in BUR roofing is usually made from coal tar, asphalt, or cold applied adhesive. Top layers of surfacing can be done with a variety of methods including: aluminum, gravel, slag, mineral surfaced cap sheets, glass-fiber surfacing or hot asphalt.

Modified Bitumen Roofing

Modified rubber roofing is similar to BUR roofing in that it includes bitumen. Reinforced roof fabrics have bitumen manufactured into them and act as a carrier for the material. This roofing material is typically made into rolls that are installed by fastening them to roofs as a two layer system. They are fully adhered to roof decking and there are generally two types of modified bitumen roofing. These are SBS and APP modified bitumen roofing. Both of them include options for surfacing layers that have mineral payers, liquid applied layers, aggregate layers, or metal foil laminate layers. SBS modified bitumen allows for either hot asphalt or cold adhesive installation. APP modified bitumen is applied with heat torches.

Spray Foam Roofing

Spray foam or SPF roofing is a foam type material that is made by mixing a tow part liquid and spraying it over the roof surface. It is many times a base layer for the preparation for other roofing layers. The thickness can be variable based on skilled technician application. This means it can act as an additional layer of insulation for your building or the thickness of the material can be varied to affect controlled drainage.

Mesa Commercial Roofing

Every business needs to be able to weather the sun, rain, and wind that is common in Mesa Arizona. We rely on our roofing to protect the contents of our businesses and homes. Loss from leaking or failing roofs can be costly to repair and disruptive to businesses. Avoid costly repairs and downtime with inspections and prompt repairs of your commercial roofs. For installation, inspection, repair or replacement call the commercial roofing experts at either: 480-232-5458 (East Valley) or 602-299-8851 (West Valley)

Spanish Tile Roofs Phoenix

Spanish Tile Roofs Phoenix

Spanish tile roofing is best when used on roofs that have a pitch that is 20° or greater. With steeper roofs there is a better visual presentation of the tiles and can really step up the curb appeal of your home. With extended durability, beautiful appearance, and even thermal insulating properties Spanish tile roofs in Phoenix help increase the comfort and value of any home.

Spanish Tile Roofing Process

Level The Playing Field – Before tile is laid down the roof needs to be completely level. If decking has sagged over the years or is broken in any way it should be repaired and brought back to being level before anything is installed. This helps protect your home and makes the tile work properly and stay in place.

Quality Underlayment – After the roof is level a layer must be put over the plywood decking. This helps protect the wood from moisture, rot, and mold. At Right Way Roofing we use only the best underlayment. In fact the underlayment we use in our roofing projects can be used as a standalone roofing system. We are dedicated to quality and work that will last. Ultimately the quality of your underlayment will play a major role in how long your roof lasts.

Spanish Tile Hanging – Next we methodically secure each and every tile to your roof. Using only the best techniques, tools, and processes recommended by the manufacturer. This means that tiles will stay in place longer, be water tight, and your roof will simply last longer. There are color variants in Spanish tile, and we will help you with the selection process to achieve the look you are dreaming of.

Spanish Tile Roof Repair & Maintenance

Many homes in Phoenix already feature Spanish roofing materials. If your roof is leaking during rainstorms you need to get it under control immediately. Leaking water might seem like a minor nuisance, but it can drastically degrade air quality, ruin insulation, and ultimately cause your home’s structure to weaken.

Seeking The Solution

Before you can fix a problem, you have to find where it is coming from. Water might be dripping down onto a certain part of your ceiling and leaking through, but the missing tile could be much further up. Water can run down a truss and drip much further away than where it entered. The first step is always looking for damaged or missing tiles. Inspecting the attic for signs of water entry and looking at the roof surface is the only way to reliably track down the problem spots.

Spanish Tile Repair Process

Once your roofing crew has found the problem area the repair plan will be explained to you. This will include the labor costs and all of the materials needed to repair your roofing. Every job is different and can range from having to rebuild compromised structural elements to simply having to replace and secure a single tile. If your home has gutters, which most do, they might need to be removed during the roof repair process. If they are old or damage this is a good time to get new replacements.

Older Spanish tile roofs can be fragile and walking on them can cause them to move and crack. For this reason if repairs must be done in the middle of the roof a row of tiles might need to be removed to create a path to do the work.


Spanish Tile Roofers Phoenix

If your Phoenix home has Spanish tile and needs repair, or you would like to replace that shingle roof with a longer lasting more visually attractive roofing alternative Right Way Roofing has you covered. Give us a call to talk about the new roofing you need, or the leaks you experienced during the last storm.

Roll Roofing Mesa


What is roll roofing?

Roll roofing is another asphalt roofing product much like asphalt shingles. Asphalt roofing rolls are common in residential roofing projects for flashings and underlayment. There are four basic types of roll roofing, each have their own best uses. Roofing codes in the state of Arizona do not allow for roll roofing to be used for flat roofs.

Roll roofing is an inexpensive roofing material that is used to cover low slope roofs.  A lot of DIY homeowners have used it and installed on top of a felt underlayment as a temporary roofing material. It has been used as the primary roof covering it is better used utility structures. The rolls are 36 inches wide and are typically sold as 36 feet in length. The common colors of the roll roofing are black, brown, and white. This material is sometimes referred to as 90 lbs felt by pro roofing companies as the weight of it is about 90 lbs.

The first types of roll roofing were made from felt canvas or sheets of cloth. These sheets were saturated with asphalt and then applied to low slope roofs. The long edge of the material was laid parallel to the eaves of the roof. Today 90 lbs asphalt roll roofing is made from either organic mat material or fiberglass reinforced mat. Both sides of the roll roofing are coated with asphalt and the exposed, or side that faces up is also coated with granules to protect it.

Roll Roof Installation

Single layer roll roofing typically has exposed nails with a 2 inch overlap between sheets.  To overcome the exposed nails many roofs are covered with a double layer of roll roofing. This means the nails are covered up under the lap joints that are in turn sealed with asphalt lap cement.  With a double layer of protection roll roofing can be used for small areas that are not flatter than 1:12 pitch.

Homeowners that want to do a DIY installation of this type of roofing should know the life expectancy of roll roofing. Due to the slopes roll roofing is used for the wear life is up to a decade, but many times can be as short as 5 years. This is because it gets “bald spots” or areas where the granules wear off from weather and the elements. If you can see these areas or areas where there are cracks you should know that the roofing is at the end of its useful life.

Mineral Surfaced

While this type of roofing is used as a primary roofing by itself it can also be a base under tile or shingle roofing. The top is imbedded with mineral granules that help increase durability. It also serves as roofing for secondary buildings like sheds, barns, and other outdoor structures.

Saturated Felt

The felt is asphalt impregnated and is an organic material. It has been used widely as underlayment between the roofing material and roof decking. For different types of installations the felt is sold in different weights, or thicknesses.

Smooth Surfaced

This type of roll roofing is used commonly at valleys, eaves, and to protect the roof decking. It can also be used to help protect protrusions, and roof line intersections. It is a smooth roofing material that is covered with mica or ground talc.

Eave Flashing Rolls

For colder climates or for superior eave flashing this is a specially designed material. It is self adhering, and made of a polymer-modified bituminous sheet. For places where water backup and ice damns this roofing helps protect the eaves from water penetrating the roof.

Roofing Contractors Mesa AZ

If your home could use new roofing the experts at Right Way Roofing know the industry, the local demands on roofing in the Phoenix area, and the right way to choose the best roofing material for your home or business. We can help you take the guess work out of making sure your roof is ready for the weather that comes each year. Protect your home and your health with roofing that will keep your home safe and dry.

Should a damaged commercial roof be recovered or replaced?

Should a damaged commercial roof be recovered or replaced?

Even though most commercial roofing systems that have been created for long term performance, most will still have issues during their overall lifespan. Issues can happen when the roof is installed wrong, created incorrectly, or it if isn’t maintained properly. Whenever you are looking to fix an issue with a commercial roof, there are 4 options: coat, repair, recover, or full replacement. It is vital to answer the questions below first, which will help you to guide you towards the choice that you need to make.

  • Does your building generate moisture? If it does, then you may not have the right roof.
  • Where is the building located and what is it used for you?
  • Are you looking for a short term or long term solution?
  • Is the building occupied? How easy would it be to tear off?
  • Does it have the right insulation?
  • How bad is it damaged and how bad is the roof?

Below are options as well as benefits of each to help determine the best way to correct the issue.

Commerical Roof Repair

Repair: Some issues for a roof may be easily repaired and just be minor, so if you don’t want to deal with the expense of a replacement. Below are some reasons that you could choose to repair your roof:

  • Owner wants to keep a cost to a minimum
  • The membrane is basically in good shape and hasn’t met its life expectation
  • The roof is well insulated


  • Extends the life of the roof
  • Less costly than recovering or replacing

Commercial Roof Recovery

Recover: Not all damaged roofs will need to be replaced. If the roof is sound and is well installed, the most effective fix would be to recover it. In many cases, the roof has just one membrane, you can place another one on top of it. Although, keep in mind that the roof can only be recovered just once. Below are reasons that you may choose to recover the roof:

  • The roof hasn’t been recovered previously
  • The roof is well insulated, but the membrane has met life expectancy


  • New and extended warranties are available
  • Less risk for the roof being exposed to elements
  • Less disruptive than full tear offs
  • Cheaper than full replacements

Full Replacement Commercial Roofs

Full replacement: Sometimes the roof isn’t the best candidate for recovering, if the damage happens to be extensive. If a roof has been recovered previously, you will need to replace it. Below are reasons to replace your roof:

  • Owners want a long term solution and wants to use the latest technology
  • Insulation is wet or isn’t up to par
  • Repairs to the roof are extensive; if more than 25% of the roof is damaged, then you need to replace


  • Energy saving
  • Less likely to have issue
  • Lower maintenance costs
  • The best option if the building is a long term building

Commercial Roof Coatings

Coating: Most commercial roofs may be coated to extend their overall life. Below are reason to coat the roof:

  • Cost effective, which means it is often less expensive than other options; rebates may be available and may written off as an expense in year one
  • Less disruptive than a tear off
  • Improves the aesthetics
  • Improves comfort inside of the building by reflecting suns rays away from the roof, which keeps the building and roof cooler
  • Reflective coatings provide energy savings by reflecting UV rays and heat from the building
  • Extends the life of the roof
  • Extra protection from leaks

Phoenix Commercial Roofing

If you have a leaky or damaged roof at your place of business you need to get the experts out to look at the damage. Different types of damage allow for repairs, recovery, or require full replacement. Let our technicians come and inspect your roof and help you come up with a cost effective plan for keeping your building in good condition and your commercial spaces dry and safe.

Best Fall Roof Maintenance Tips

Best Fall Roof Maintenance Tips Mesa AZ

Fall is a good time take care of your roof maintenance with more mild temperatures. In Arizona it comes a little later than other places in the country, but the cooler weather still comes. Knowing if there is any damage to your roof now, can prevent you from having to climb up in bad weather. Taking care of your roof proactively also extends the life of your roof. These are the best fall roof maintenance tips.

Trim The Tree

While Christmas is still a ways off, you should trim the trees around your home. As trees grow they usually get taller, and wider. This means that they grow toward the house and need to be kept back. If sections of your tree hang over your roof they pose a danger. Strong winds and tree diseases can mean they break and fall on your roof. The weight can pierce the roofing, the underlayment, and even the decking. Another benefit of trimming the tree back is less leaves in your gutters.

Clean Out The Gutters

While it is a bit of a thankless and somewhat dangerous task, it needs to get done. Gutters that are cleaned out help keep water flowing away from the roof. Clogged gutters splash water back up on the roofing and can lead to mold, cracking and other types of damage. Water can also spill out of the gutters and fall directly onto windows and window panes. Water allowed to free fall off the roof or out of clogged gutters also undermined the foundation of homes.

Add Gutter Guards

Gutter guards are caps that are put over your gutters that keep leaves from falling in and clogging your gutters. They are fairly inexpensive and easy to install. Installing them will reduce the need to climb up and clean your gutters to prevent storm damage to your roof.

Get A Roof Inspection

Having a roof inspector come out to take a look at the condition of your roof is a great way to avoid problems. Catching problems early can prevent serious and costly damage to your home. Water that is allowed to enter the home can cause damage. The damage can be ruining insulation, weakening the roof structure, or even the development of dangerous molds.

Invest In A Strong Roof

If you find out from the inspection that your roof does in fact have problems, get them fixed earlier than later. Fall is a great time to take advantage of lower electricity bills with not running the air conditioning all day and night. Use that savings to invest in your roof and it will keep you safe and dry. It will also cost less to fix problems while they are small. Instead of having waiting for leaks to get larger and ruin the roof, its insulation, and the contents of your home make sure you get repairs done promptly.

Mesa Roof Inspection & Repair

If you have a home in the east valley or Phoenix and want to catch problems before they become bigger and more costly follow these tips and call for one of our free roof inspections. Give us a call and we will come take a look at your roofs condition and help you find a way to affordably fix any issues you might have.


Foam Roofing in Arizona


No matter what kind of roofing material was used when your house was first built, it will eventually wear out. Knowing the options that are available to replace it with, helps make more informed decisions for budget, longevity, and performance. Foam roofing in Arizona can be an excellent option for homeowners. It has specific benefits for the heat we experience. We have expanded the information to help you consider it as one of your choices when picking a new roofing system.

What Roofs Is It Good For?

Flat roofs are typically where foam roofing has been found but it can be applied to virtually any type of roof. Roofs that have unusual architecture can be difficult to custom fit with traditional roofing materials. Foam roofing can be sprayed on and this helps the roofing compound get into tighter, harder to reach spots.

Foam roofing does more than keep out the water from rain storms, it helps keep the heat out. With an average of 300 days of sunlight per year keeping our homes comfortable from the heat of summer is one of our biggest priorities in Arizona. With that in mind we choose great insulation for our attics and the walls of our homes. Foam roofing can help add increased thermal protection from the heat. This means even lower electricity bills from running air conditioners.

While the cost of installing a foam roof does run a little higher than shingle roofing, the savings pay the difference quickly. Paying to install the roofing happens only once every 20 or so years; having energy savings every single year pays the difference for the foam roofing, and much more.

What Exactly Is Foam Roofing?

For better than 45 years polyurethane foam has been used as an insulator.  A combination of polyol and isocyanat is combined through a sprayer at the time of application. The compound is applied as a liquid and shortly after application it begins to bubble up and expand. This process helps force the material into crevices and cracks in the roof and seals them up. This property makes foam roofing extremely dynamic and a great option for virtually any type of roof.

One of the major advantages to being a sprayed on roofing system is that there are no seams. Seams in other roofing systems can be the Achilles heel in keeping water from leaking into the house. Because foam roofing is applied as a liquid it bonds to itself without seams and creates a water, and air tight seal. This helps the thermal performance of the roofing system and helps save even more energy.

The final step after the spray foam is laid down is adding an outer layer. This outer layer’s job is to protect the foam from the elements.  The outer layer helps protect the roof from damage from branches or limbs falling on your roof if you have a tree near the house, or if you have workers up on your roof. Even if the outer layer is damaged the seal from your foam roof will remain intact.

Foam Roofing Installation & Repair

If you have a home in the Phoenix valley Right Way Roofing can help you install, maintain, and repair foam roofing or any other type of roofing you might have. If you need some help deciding which type of roofing is best for your home, your location, and your budget we will help you make the most cost effective decisions for your Arizona home.


Corrugated Metal Roofing


What Is It?

Corrugated metal roofing is made from sheets of thing metal. The metal itself when flat is not terribly rigid and tends to sag and bow. Corrugation is uniform groves that are placed in the metal to provide increased rigidity. They help the material stay stiff and span greater areas without additional support. It is similar to how many cardboard boxes are made with a wavy line of paper running on the inside of the cardboard.

How Durable Is It?

Metal being a naturally durable type of building material it is not surprising that corrugated metal roofing can last up to a century. Not only is it long lasting against the erosion of time, but it is also durable in weathering hail storms, heat, rain, and other inclement weather. In fact metal roofing is one of the best options for lightning. It might seem counterintuitive but lightning isn’t attracted to the metal, and if it is struck the energy is simply dissipated through the structure. The majority of modern galvanized metal roofing is also fire resistant, which helps keep your property safe.

Varieties Of Corrugated Metal Roofing

There are 3 main types of corrugated metal roofing, copper, stainless steel, and aluminum. Each have their own advantages and disadvantages. The application of roofing, being it residential, commercial, or even agricultural will influence which is the best option for your purposes.

Aluminum Corrugated Roofing – The quality and value of this roofing material is one of the best for residential roofing. It is beloved by many homeowners because it is paintable and naturally rust resistant. Even if paint isn’t desired additional coatings are not necessary due to aluminum’s natural resistance to corrosion and rust.

Stainless Steel Corrugated Roofing – These sheets are naturally grey due to the color of steel. There are limitations to color options for the bare metal and additional painting. It also costs more than aluminum and is generally heavier.

Copper Corrugated Roofing – Copper has been used for many famous and beautiful architectural marvels. Many a European castle is adorned with copper roofing and its wonderful look is also quite durable. Copper is naturally resistant to rust and can last for a very long time. Because of these qualities it is typically also the most costly of the 3 materials.

Is It A Environmentally Friendly Option?

One of the great things about metal roofing is that it is 100% recyclable. This means less production using raw materials and less need to mine for resources. In addition lasting in some cases 4 to 5 times as long as some traditional roofing options using metal roofing uses drastically less materials over time to keep your home safe and dry. Metal roofing also offers energy savings in the southern climates where we have to run air conditioners all day and night to keep our homes comfortable. Metal naturally has properties that reflect the energy from the sun and keep that heat out of our homes. Metal roofing can also be lightweight which will require less framing and structural support. This means less draw on 2×4’s and other building materials.

Corrugated Metal Roofing by Right Way Roofing

If you have a home or structure that could use a new metal roof, or metal roof repair in the East Valley or anywhere in Phoenix give the pros at Right Way Roofing a call. We only use the best materials, best underlayment, and best fasteners to get the job done and offer the longest roofing warranties in the business.


Shingle Roofing Vs. Metal Roofing

Shingle Roofing Vs Metal Roofing Phoenix

If you are building a new home or you are ready to put new roofing on your home in Phoenix, knowing the difference between shingle roofing vs metal roofing can help you make an informed decision. We will take a closer look at both in this article.

Shingle Roofing

Shingle Roofing

The benefits of shingle roofing are cost and soundproofing. The biggest con for the shingles is the lifespan. They typically last about 25-30 years. Shingle roofing also doesn’t offer the same protection in extreme weather conditions. However shingle roofing is naturally a better option for soundproofing.

Metal Roofing

Metal Roofing

Metal roofing is very strong and durable. In addition metal roofing can help your home stay cooler during the punishing Arizona summers. It might cost a little more upfront, but it lasts longer, keeps your house cooler, and is better for extreme weather. In comparison to the 25-30 years shingle roofing lasts, metal roofing is often backed by a 50 year warranty.  Metal roofing isn’t known for being a great soundproofing option, but with proper insulation you can have the best of all three benefits, durability, soundproofing, and energy savings.

Read DCT Roofing Solution’s post titled “6 Reasons to Consider Using Metal Roofing Next Time You Need to Replace Your Roof” to learn more about metal roofing.

Regional Roofing Considerations

Shingles tend to be adequate for temperate climates. Arizona or Phoenix more specifically, is not temperate in any way shape or form during the summers. With temperatures pushing over 120 on some of the hotter days having a roofing system that is up to the challenge of keeping your home cooler will pay off. Metal roofing clearly has the edge with a natural ability to reflect some of the heat straight away. With proper insulation the savings can be even higher.

The Science Of Staying Cool

If you’ve ever leaned against a car in the summer time and been burned it might be hard to believe that a metal roof can help your house stay cooler. However metal roofing has the advantage over shingle roofing. Shingles, especially the darker colors, tend to absorb the heat from the sun. This passes more heat on to your insulation. If you reflect heat before it can absorb into the roofing material there is less heat your home’s insulation has to contend with and your home will stay cooler. The savings you reap every year with lower energy costs with a metal roof can add up. Peak cooling demands can be reduced by as much as 10-15% with metal roofing. With additional coatings, sealants, or colors metal roofing can be even more effective at keeping your home cooler. Light color metal roofing or roofing with elastomeric coatings help keep Arizona’s summer sun at bay.

Shingle Vs. Metal Roofing Cost Comparison

Metal roofing is more costs up front. There is no getting around that fact. The cost of a metal roof can be as much as 2 or 3 times higher. With the difference in durability and energy savings metal roofing is very likely to make up for the difference, and last much longer. It clearly also has the edge in extreme weather conditions. The federal government has tax credits available for either roofing system, which does help offset the cost of installing new roofing.

Phoenix Roofing Professionals

If you are building your new dream home in the Phoenix valley, or you need new roofing on the home you are in, give Right Way Roofing a call.

We do free roofing inspections and can help you with all of your roofing needs.

Right Way Roofing – 480-232-5458 or 602-299-8851

Phoenix Roofing Company Mesa AZ


Standing Seam Metal Roofing


Standing seam metal roofing is one of the premium choices for homeowners in Mesa, AZ. It costs a little more than other roofing systems but requires very little maintenance and is one of the most durable roofing systems available. Homeowners that plan on keeping a house for many decades and want to have a roof that will stand the test of time many times settle on metal roofing. It is very unlikely that the roof will need to be replaced with standing seam metal roofing.

What Is A Standing Seam?

A standing seam is an interlocking metal panel roofing option. Metal roofing in some homeowner’s minds consists of corrugated metal sheets like you would find on sheds, barns, or some industrial roofs. The interlocking standing seam provides the water resistance necessary, while having a look that is more flat between the seams. This is a look a lot of homeowners have come to love.

When a standing seam metal roof is installed the panels are placed vertically on the roof and the edges are crimped together. This creates a weather tight seal that keeps your home dry. The materials used to make the panels are typically made from copper, steel, or aluminum. Aluminum is the least expensive of all the materials, while copper is the most expensive. Copper does give a very unique and timeless appearance to the roof. With the durability these roofs offer it is important to choose a look that you will love for a lifetime.

Standing Seam Types

There are two types of seams in standing seam metal roofing. There are snap lock and field-locked seams. A field-locked standing seam is when the seam is made mechanically on the worksite. It is done using specialized crimping tools that press the metal sheets seams together to keep water out. Snap lock standing seam panels cost a little more but are installed by simply snapping the panels together.

Standing Metal Seam Installation

Like any type of roofing metal panel roofing relies on the roofing company’s skill and attention to detail to install it correctly. If it isn’t done right it can lead to leaks and costly repairs. Many times homeowners that want to have metal roofing installed can choose to have it simply installed over their existing shingles to provide a little more water resistance. This is only advisable if the shingle roof is still in good repair. One of the great things about metal roofing is that it can be installed in cold weather. Tar based roofing products many times require warmer weather.

Costs involved to install a standing seam metal roof vary depending on which style you choose. Depending on the type of standing seam panels you choose the price difference compared to corrugated metal sheets will be 2 or 3 times the cost. However they do offer a better look and are much more durable.

Standing Seam vs. Corrugated Sheets

The thickness of the metal used to fabricate the metal roofing panels vary; however standing seam panels are usually thicker. The lower the gauge numbers the thicker the metal sheet. Corrugated panels are usually made of a very thin 29 gauge steel. Standing seam panels are built with a minimum of 26 gauge steel. Thicker versions of the standing seam metal panels can be used for structural or architectural profiles.

Advantages Of Standing Seam Metal Roofing

There are a lot of advantages to standing seam metal roofing, but we will take a look at 5 of the main advantages here:

Keeping Roofing Costs Low – While they might cost a little more upfront in the long term they will end up saving you money. Asphalt or wood systems may cost less but when you considering having to replace those 2 or 3 times while your neighbors metal roof just keeps lasting it make more sense. Traditional roofing materials are usually good for about 15 – 20 years, while metal can last 50 years or longer. Even if you don’t plan on staying in the home forever, a higher quality roof means a higher resale value.

Lightweight Roofing Material – Choosing a lighter weight roofing material doesn’t just make it easier and more simple for the material to be brought to the jobsite and transferred to the roof. It also makes it so there is less weight and strain on the roof’s structure. A lot of metal roofing weights less than 200 lbs per square foot.

Harsh Weather Resistant – Regardless of the type of metal you choose the roof deals with hail, high winds, and heavy rain better than just about any other type of roofing. Metal is naturally impervious to fire and is exceptionally waterproof.

Reflecting Roofs – Heat is an enemy in summer time. It makes us run our air conditioning more hours a day, which raises our electricity bills. Metal has a natural ability to reflect heat and keep it out of our attics and homes. Additional coatings can be selected to increase this property and greatly reduce your electricity bills during summer.

Metal Is Puncture Resistant – It’s necessary for workers or homeowners to occasionally have to get up on the roof. If tools are dropped it can lead to leaks in many types of roofing systems. Metal roofing is very resistant to puncturing and helps keep your home safe. It isn’t just people that might land on your roof while working, but tree limbs or debris from storms, so metal roofing keeps you safe and dry from a lot of common problems that cause leaks.

Standing Seam Metal Roof Installation & Repair

If you have a house or business in Mesa or the Phoenix area and need to have roof repair or a new roof installed, Right Way Roofing can help you get it done right, the first time. We are a family owned and operated company that has been proudly serving the people of the Phoenix valley for 3 generations. We know the area, we know the products, and we only use the highest quality materials and the right techniques to install roofing in Arizona. Give us a call and we can help you come up with a plan to keep your home safe and dry.